CNC machining centres for aluminium and PVC profiles
A CNC centre performs every programmed hole, slot and cut-out on the bar, with no templates and no moving the part between machines. Here is when the investment makes sense and which LGF model fits your workshop.
Request a quoteWhen a CNC centre pays off
- you make many types of windows, doors or profile systems and keep changing templates;
- you run repetitive batches and want identical quality on every piece;
- you machine long profiles, or parts longer than the machine;
- you want a less experienced operator to work safely from a program.
LGF models
From the 4-axis centre for bars up to 7 m to the CNC copy routers and the manual Junior M:
Orion
CNC machining centre
- Work processing from 0° to 180° and intermediate degrees by means of spindle rotation
- 5,5 kw (7,5 HP) electro-spindle with cone type ISO 30 – 12000 r.p.m.
- X axis stroke (length) = 4000/7000 mm
Phoenix
CNC machining centre
- Rotation of the work bench at 90°, 0°, -90°
- 5,5 Kw (7,5 HP) electro-spindle with cone type ISO 30 – 12000 r.p.m.
- X axis lengths 2500/3000/4000 mm
Tiger CNC
CNC router
- Axis speed: X axis 80 m / min – Y axis 30 m / min – Z axis 30 m / min
- Three-phase motor 1.5 KW (2 HP) – 12000 rpm
- ER 25 Ø spindle clamp with manual tool change
Junior M
Manual machining centre
- 1,5 Kw (2 HP) 3 phase motor
- Working capacity with router bit L= 40mm 2500x250x210
CNC or copy router?
| Copy router | CNC centre | |
|---|---|---|
| How it works | follows a template, manual or semi-automatic | runs a program on controlled axes |
| Changing the job | swap the template | load another program |
| Investment | lower | higher |
| Best for | small to medium volumes, few models | high volumes or many models |
What does 4 axes mean?
Besides the three travel directions (X, Y, Z), the working head can rotate, so the profile is machined on several faces without turning it over.
Who programs the machine?
LGF centres are controlled from an industrial PC running dedicated LGF software with a Windows interface. The operator is trained at commissioning.
Thinking about CNC?
Send us a few profile drawings and the machining you do. We will tell you which model fits and what options you need.
Request a quoteCall: +40 712 641 983