Gamma Digit Plus – double-head saw with motorised tilt
Gamma Digit Plus sets both length and head angle automatically, from 22.5° to 90° at any value. The operator picks the job on the 10″ touch screen or loads the cutting list from USB.
Request a quote for Gamma Digit PlusFull data sheet on lgfromania.roManufacturer: LGF, Italy 3 axis electronic double mitre saw
Which workshop is it for?
- workshops that often cut intermediate angles (22.5°, 30°, 67.5°);
- production with less experienced operators;
- bars of 4, 5 or 6 m.
How it compares with similar models
Unlike Gamma Swing Digit Plus, tilt goes inwards between 22.5° and 90°. If you only cut at 45° and 90°, Gamma Digit is usually enough.
Gamma Digit Plus specifications
Technical data
- Machine equipped with electronic positioner, c/w 10″ color screen and touch screen system
- USB port to store/upload of cutting list
- Full protection of the sawblades by means of safety hoods with automatic closing
- Right head displacement by means of electronic positioner
- Sliding of the moving head by means of recirculating ball bearings on rectified and tempered guides
- Radial sliding of the sawing carriage
- Controlled and motorized heads tilting from 22,5° to 90° and any intermediate degrees
- Possibility to mount sawblades Ø 500 – 530 – 550 mm
- 2,2 Kw (3 Hp) 3 phase – 2800 r.p.m.
- Sawblade shaft Ø 30 mm
- Cutting lengths 4000/5000/6000 mm
- Working pressure 7 bar
- Overall dimensions 533-633-733x139x196 cm
- Weight 1200 – 1350 – 1500 Kg
Standard equipment, options and the manufacturer’s PDF data sheet are on the Gamma Digit Plus page on lgfromania.ro.
Other models in this category
Gamma Swing Digit Plus
3 axis electronic double mitre saw
- Controlled and motorized heads tilting from 22,5° to -45° and any intermediate degrees
- Possibility to mount sawblades Ø 500 – 530 – 550 mm
- Sawblade shaft Ø 30 mm
Gamma Digit
Electronic double mitre saw
- Pneumatic heads tilting at 90° a + 45°
- Possibility to mount sawblades Ø 500 – 530 – 550 mm
- Sawblade shaft Ø 30 mm
Gamma Digit Special
Electronic double mitre saw
- Pneumatic heads tilting at 90°/+ 45°/22,5°
- Possibility to mount sawblades Ø 500 – 530 – 550 mm
- Sawblade shaft Ø 30 mm
Want a quote for the Gamma Digit Plus?
Tell us which profiles you work with, the lengths and your volume. We will send the right configuration and a quote.
Request a quoteCall: +40 712 641 983